des-1008Pa
4
ENGLISH
led indicators
The LED indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
Power on
Power off
When the Link/ACT LED lights on, the port is successfully connected to Ethernet
network.
When the Link/ACT LED is blinking, the port is transmitting or receiving data on the
Fast Ethernet network.
No link.
The power output to PDs has reached 43W,The PoE MAX is green.
When the system is using less than 43W.
The power output to PDs has reached maximum power 58W,the PoE MAX will blink.
No additional PDs can be powered.
When the PoE powered device (PD) is connected and the port supplies power
successfully.
No PoE powered device (PD) connected.
To Next Page
Loading...
