3. Installation
The site where you place the DES-1026G may greatly affect its
performance. When installing, take the following into your consideration:
Install the DES-1026G in a fairly cool and dry place. See Technical
Specifications for the acceptable temperature and humidity
operating ranges.
Install the DES-1026G in a site free from strong electromagnetic field
generators(such as motors), vibration, dust, and direct exposure to
sunlight.
Leave at least 10cm(about 4 inches) of space at the front and rear of
the hub for ventilation.
Install the DES-1026G on a sturdy, level surface that can support its
weight, or in an EIA standard-size equipment rack.
When installing the Switch on a level surface, attach the rubber feet
to the bottom of each device. The rubber feet cushion the hub and
protect the hub case from scratches.
Rack Mounting
The DES-1026G can be mounted in an EIA standard-size, 19-inch rack,
which can be placed in a wiring closet with other equipments. Attach the
mounting brackets to both sides of the Switch(one at each side), and
secure them with the provided screws.
To Next Page
Loading...
