System power Threshold: When the radio of the system power
supply is large than or smaller than the System power Threshold
setting, the Switch will send trap event to the Management
Station.
Note: When there is a system power shortage with the PD, the
Switch will enforce the PoE port priority management. The lower
port number will have the higher priority than the higher port
number, Port 1 > Port 2 > … > Port 24.
Device Status
Click on the “Status” button to display the device status on this
screen. It will display the System Status, Port Status, VLAN
Status, Trunk Status, Mirror Status, and PoE Status.
Press “Refresh” when you need to renew the posted information.
53
To Next Page
Loading...
