DES-3000 Series Layer 2 Switch CLI Reference Manual
224
config command_history
Purpose Used to configure the command history.
Syntax
config command_history <value 1-40>
Description This command is used to configure the command history.
Parameters
<value 1-40> The number of previously executed commands maintained
in the buffer. Up to 40 of the latest executed commands may be viewed.
Restrictions None.
Example usage
To configure the command history:
DES-3026:4#config command_history 20
Command: config command_history 20
Success.
DES-3026:4#
To Next Page
Loading...
