D-Link DFE-528TX Quick Install Guide

Contents of Package:Contents of Package:
DFE-528TX 10/100 Fast Ethernet Adapter
Quick Install Guide
CD-ROM, which includes driver software
If any of the above items are missing, please contact your reseller.
Requirements:Requirements:
• PowerPC-based Macintosh computer with free PCI slot
• Operating System 8.0 or higher
• A .SIT and .ZIP-compatible utility such as Aladdin Systems Stuffit or
Stuffit Expander. Aladdin currently provides a free download of Stuffit
Expander at their website at www.aladdinsys.com
Installation Procedure:Installation Procedure:
1.1. Install the DFE-528TX
2.2. Install the Drivers
3.3. Configure the Network Services
Installing the DFEInstalling the DFE--528TX into the 528TX into the
computer’s PCI slotcomputer’s PCI slot
Note: Make sure that Aladdin Systems “Stuffit” or “Stuffit Expander” has been
installed on your computer before you continue with the installation.
• Turn OFF the computer
• Insert the DFE-528TX into an available PCI slot

D-Link DFE-528TX Specifications

General

Device Type	Network Adapter
Form Factor	Plug-in card
Interface	PCI
Ports	1 x RJ-45
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Network Standard	IEEE 802.3, IEEE 802.3u
Connector Type	RJ-45
Full Duplex Support	Yes
Data Transfer Rate	100 Mbps
Operating System Support	Windows, Linux
Compliance	FCC, CE
Cable Type	10BASE-T, 100BASE-TX
LED Indicators	Link/Activity