Need help?Do you have a question about the D-Link DWA-110 and is the answer not in the manual?
General| Wi-Fi | Yes |
|---|---|
| Modulation | DBPSK |
| Wi-Fi band | Single-band (2.4 GHz) |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA2-PSK |
| Maximum data transfer rate | 54 Mbit/s |
| Connectivity technology | Wireless |
| Output voltage | 5 V |
| RX power consumption | 280 mA |
| Dimensions (WxDxH) | 87 x 28 x 12 mm |
| Compliance industry standards | IEEE 802.11g/b |
| Compatible operating systems | Windows 98SE, ME, XP SP2, 2000 SP4, Vista |
| Storage temperature (T-T) | -20 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Certification | FCC Class B, CE, C-Tick, IC, Wi-Fi, WPS |
Specifies the necessary hardware and software for the DWA-110.
Steps to disable built-in or other wireless adapters to prevent conflicts.
Step-by-step guide to installing the D-Link DWA-110 driver and utility.
Overview of the D-Link management software for the adapter.
Describes how to view and connect to available wireless networks using the utility.
Instructions for configuring WEP security using the Windows XP Utility.
Guide to setting up WPA/WPA2 security with a passphrase using the Windows XP Utility.
Troubleshooting steps for when the computer fails to detect the DWA-110 adapter.
Solutions for connectivity issues after the DWA-110 is installed.
To Next Page
