What to do if computer does not recognize D-Link Adapter DWA-131?
If your computer does not recognize the D-Link Adapter DWA-131, make sure that it is properly seated in the computer’s USB port. If Windows still does not detect the hardware, completely remove any previously loaded drivers for the adapter.
What to do if the computer does not recognize the D-Link Adapter DWA-131?
If your computer isn't recognizing the D-Link Adapter DWA-131 Wireless USB, ensure it's properly inserted into the computer's USB port. If Windows still fails to detect the hardware after inserting the adapter, completely remove any previously installed drivers for it.
What to do if computer does not recognize D-Link Adapter?
If your computer does not recognize the D-Link Wireless N Nano USB Adapter, ensure it is properly seated in the computer’s USB port. If Windows still does not detect the hardware after inserting the adapter, completely remove any previously loaded drivers.
What to do if my D-Link Adapter DWA-131 cannot connect to the wireless network or the Internet?
If your D-Link Adapter DWA-131 cannot connect to the wireless network or the internet, you can try the following: * Check the LED indicators for the broadband modem to ensure they indicate normal activity. A problem with the broadband connection may exist if they don't. * Verify the LED indicators on the wireless router are functioning correctly. Ensure the AC power and Ethernet cables are firmly connected. * Confirm that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the network. * In Infrastructure mode, ensure the same Service Set Identifier (SSID) is specified on the settings for the wireless clients and access points. * Check that the Network Connection for the wireless client is configured properly, selecting AP (Infrastructure) when conn...
What to do if my D-Link Adapter DWA-131 cannot connect to the internet?
If your D-Link Adapter DWA-131 cannot connect to the wireless network or the Internet, verify the following: * Confirm that the broadband modem LED indicators show normal activity, as there might be an issue with the broadband connection. * Ensure the wireless router's LED indicators are working correctly, and that both the AC power and Ethernet cables are securely connected. * Check that the IP Address, subnet mask, gateway, and DNS settings are correctly configured for your network. * If using Infrastructure mode, ensure the Service Set Identifier (SSID) is identical on both the wireless clients and access points. The default SSID for D-Link products is 'default'. * Verify that the Network Connection for the wireless client is properly configured, selecting 'AP (Infrastructure...
Why my D-Link DWA-131 is unable to connect to the wireless network or the Internet?
If your D-Link Adapter cannot connect to the wireless network or the Internet, first ensure that the LED indicators for the broadband modem show normal activity, indicating no issues with the broadband connection. Also, verify that the LED indicators on the wireless router are working correctly and that both the AC power and Ethernet cables are securely connected. Check that the IP address, subnet mask, gateway, and DNS settings are correctly configured for your network. Ensure that the same Service Set Identifier (SSID) is specified on both the wireless client and access point settings in Infrastructure mode; the default SSID for D-Link products is 'default'. Confirm that the Network Connection for the wireless client is properly configured, selecting 'AP (Infrastructure)' when connecting...
Lists items included in the product package.
Specifies the minimum hardware and software needed for the adapter.
Provides an overview of the DWA-131 adapter's features and benefits.
Details the key capabilities and specifications of the DWA-131 adapter.
Describes the physical components and ports of the DWA-131 adapter.
Pre-installation steps including checking for existing installations.
Instructions on uninstalling previous wireless adapter software.
Guide to disable built-in or other wireless adapters to avoid conflicts.
Tips for optimizing wireless signal strength and placement.
Step-by-step guide for installing the DWA-131 hardware and drivers.
Steps to connect to a wireless network using the wizard.
Instructions for connecting using Wi-Fi Protected Setup (WPS) via push button.
Introduces the software for managing wireless adapter settings.
Explains how to view and connect to available wireless networks.
Details the WPS system for easy security-enabled Wi-Fi setup.
Describes the physical push button process for WPS connection.
Explains how to use the PIN method for WPS connection.
Manages saved wireless network profiles, allowing creation, editing, and deletion.
Guide to creating a new wireless network profile manually.
Instructions for editing an existing wireless network profile.
Accessing help and information about the wireless utility.
Displays firmware and utility version information for the DWA-131.
Explains the WPA standard and its improvements over WEP.
Steps to set up WPA/WPA2 passphrase using the D-Link utility.
How to configure WPA/WPA2 passphrase in Windows Vista.
Steps to set up WPA/WPA2 passphrase in Windows XP.
Advanced configuration for WPA/WPA2 using a RADIUS server.
Steps to verify if the DWA-131 adapter is correctly installed.
Troubleshooting steps for when the adapter is not detected by the computer.
Solutions for connection issues to wireless networks or the internet.
Explains wireless technology and its benefits.
Highlights D-Link's position and offerings in the wireless market.
Describes WPAN technology, contrasting it with WLAN.
Discusses common users and benefits of wireless technology at home and office.
Explains common locations and scenarios where wireless technology is utilized.
Provides practical advice for optimizing wireless network setup and performance.
Advises on securing wireless networks using WPA or WEP.
Explains the two main networking modes: Infrastructure and Ad-Hoc.
Guides on how to find the IP address using Windows XP/2000 and Vista.
Instructions for manually setting an IP address for Windows XP/2000.
Details the warranty coverage for the product's software.
Outlines conditions under which the warranty does not apply.
Procedures for submitting a warranty claim to D-Link.
Specifies D-Link's liability limits regarding the product.
States the jurisdiction and laws governing the warranty.
FCC compliance and RF exposure information for the device.
Industry Canada compliance and RF exposure information.
Wireless Standards| standard | IEEE 802.11n, IEEE 802.11g |
|---|
Interface| bus type | USB 2.0 (1.1 compatible) |
|---|
Frequency and Modulation| frequency range | 2.4GHz to 2.4835GHz |
|---|---|
| modulation technology | Orthogonal Frequency Division Multiplexing (OFDM), Complementary Code Keying (CCK) |
Power and Operating Conditions| operating voltage | 5 VDC +/- 10% |
|---|---|
| operating temperature | 32°F to 104°F (0°C to 40°C) |
| operating humidity | 10% to 90% maximum (non-condensing) |
Weight and Dimensions| dimensions | 1.1” x 3.4” x 0.5” |
|---|---|
| weight | 0.06 lbs (27.22g) |
To Next Page
