How to fix computer not recognizing D-Link Adapter?
If the computer does not recognize the D-Link DWA-111 Wireless Adapter, ensure it is properly seated in the computer’s USB slot. If Windows does not detect the hardware upon insertion, completely remove any previously loaded drivers.
Lists the items included in the D-Link DWA-111 package.
Specifies the minimum hardware and software needed to run the DWA-111.
Initial steps and checks before installing the D-Link wireless adapter.
Instructions for uninstalling previous wireless adapter software to prevent conflicts.
Guide to disabling built-in or other wireless adapters to avoid conflicts.
Tips for optimizing wireless signal range and performance by considering placement and environment.
Step-by-step instructions for installing the D-Link DWA-111 driver and utility software from the CD.
Details on using the D-Link management software for adapter settings.
How to view and connect to available wireless networks using the Site Survey page.
Managing saved wireless network profiles, including creating, editing, and deleting them.
Steps to create a new wireless network profile with specific settings.
Instructions for editing an existing wireless network profile.
Accessing help and information about the D-Link utility.
Displays firmware and utility version information for the DWA-111.
Using the Windows XP built-in utility to connect to wireless networks.
How to disable the Windows XP wireless utility to use the D-Link utility.
Explanation of Wired Equivalent Privacy (WEP) encryption and its function.
Explanation of Wi-Fi Protected Access (WPA) security features and improvements over WEP.
Steps to configure WEP security using the D-Link Utility.
Steps to configure WEP security using the Windows XP built-in utility.
Steps to configure WPA/WPA2 security using the D-Link Utility.
Steps to configure WPA/WPA2 security using the Windows XP built-in utility.
Advanced configuration for WPA/WPA2 using RADIUS server and certificates.
Advanced configuration for 802.1x security using RADIUS server and certificates.
Procedure to verify if the D-Link DWA-111 adapter is correctly installed in the system.
Troubleshooting steps for when the computer fails to detect the DWA-111 adapter.
Steps to diagnose and resolve connectivity issues with the DWA-111 adapter.
Explanation of WLAN technology, access points, and signal range.
Explanation of WPAN technology, like Bluetooth, and its applications.
Description of the two primary wireless networking modes: Infrastructure and Ad-Hoc.
Procedure to check the assigned IP address, subnet mask, and default gateway.
Guide to manually configuring a static IP address for the network adapter.
To Next Page
General
