D-Link DFM-560EL

D-Link DFM-560EL External Modem User’s Guide
64
Chapter
8
Commands
Most people use the communication software programs to tell modems
what to do. Therefore, you may not use the commands in this chapter.
However, if you prefer to communicate with your modem directly, you
can type the commands described below. Here describes how to work in the terminal mode.
8.1 Typing Commands
z
Use the BACKSPACE key to delete typing errors.
z
Every command (except A/ and +++) must begin with the AT or
at prefix and be entered by pressing the <Enter> key. For
example, to execute the V command, you would type ATV and
press the <Enter> key.
z
When you see an n, replace the n with one of the letter or numeric
options listed for that command. For example, for the En
Command, you might type ATE1.