25
Using the Boot Menu
Device Information
Each item on the Device Information screen is described below:
Device Type: This displays the model name of this device.
MAC Address: This displays the MAC address of this device.
Serial Number: This displays the serial number of this device.
Boot PROM Version: This displays the version number of the device’s
startup code.
Firmware Version: This displays the version number of the device’s
runtime code.
Hardware Revision: This displays the revision number of the hardware
circuitry.
System Country Code: This is a user-defined country code for this
device. < 0:USA, 1:Japan (Default) >
System Name: This is a user-defined name for this device.
System Location: This is a user-defined physical location of the
device.
System Contact: This is user-defined contact information for the person
or department responsible for the maintenance of this device.
Update Firmware and Configuration Files
New software can be downloaded from a TFTP server.
Use the arrow keys to highlight the third menu item on the Boot Menu, Update
Firmware and Configuration Files, and press <Enter>. The Update Firmware
and Configuration Files screen will be displayed:
To Next Page
