To Next PageTo Next Page
Need help?Do you have a question about the D-Link DVG-6004S and is the answer not in the manual?
General| Device Type | VoIP Gateway |
|---|---|
| Fax Support | T.38 |
| Power Supply | 12V DC, 1.5A |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Ports | 4 FXS |
| Network Interface | Ethernet |
| Protocols | SIP, H.323 |
| Voice Codecs | G.711, G.723.1, G.729A |
| Storage Temperature | -20°C to 60°C |
Overview of the DVG-6004S/6008S VoIP Gateway, its features and connectivity.
Details the front and rear panel hardware components and indicators of the gateway.
Explains the different modes of network interface configuration.
Describes how the gateway connects to PSTN and PBX systems.
Configures the gateway's Wide Area Network (WAN) connection settings.
Configures the gateway's Local Area Network (LAN) settings.
Sets Quality of Service parameters for network traffic prioritization.
Configures Network Address Translation (NAT) and Dynamic DNS (DDNS).
Manages Caller ID detection and display settings for incoming calls.
Configures telephony-related features like dialing rules and call handling.
Configures Session Initiation Protocol (SIP) settings for VoIP communication.
Defines rules for call routing based on dialed numbers.
Configures settings to prevent Denial of Service (DoS) attacks.
Allows backing up and restoring gateway configurations and settings.
Provides functionality to upgrade the gateway's software from a remote source.
Guides users through gateway setup and queries using voice prompts.
Details static, DHCP, and PPPoE IP configuration steps via IVR.
Explains how to initiate calls and the rules for dialing.
Describes the process of looking up dialed numbers through various tables.
Provides examples of how the gateway matches dialed numbers to routing rules.
Lists the comprehensive features of the DVG-6004S/6008S VoIP Gateway.
