DVG-6004S/6008S User’s Manual Hardware Description
Rear Panel
DVG-6004S
DVG-6008S
WARNING: DO NOT (1) connect the phone ports to each other (FXO to FXO) or (2) connect any
phone port (FXO) directly to a Phone set. Doing so may damage your VoIP gateway.
To restore factory default settings (IP address, User’s Name, Password):
(1) Disconnect the power plug.
(2) Press and hold the reset button for 6 seconds.
(3) Reconnect the power plug while pressing down on the reset button.
(4) Release the reset button after 6 seconds. Factory settings will be restored.
D-Link Systems, Inc. 3
This Manual: http://www.manuallib.com/file/2602385
To Next Page
Loading...
