72
Command Line Interface
General Setup Commands
nwdbg tftp <0|1>
Definition: This command sets the software download link to either
a WAN link or a LAN link. If only nwdbg tftp is typed, this
command shows the download link.
Parameter(s): <0:WAN link, 1:LAN link>
Example: nwdbg tftp 0
nwdbg dns <DNS IP>
Definition: This command sets the Domain Name Server’s IP address. If
only nwdbg dns is typed, this command shows the DNS IP/
STATE.
Parameter(s): <DNS IP>
Example: nwdbg dns 10.1.1.5
nwdbg dns <disable|enable>
Definition: This command turns on/off the DNS function. If only
nwdbg dns is typed, this command shows the DNS
IP/STATE.
Parameter(s): [disable | enable]
Example: nwdbg dns disable
nwdbg country <code>
Definition: This command provides country code setting interface
to config the tone frequency for different country. If only
nwdbg country is typed, this command shows the
COUNTRY CODE.
Parameter(s): <0:USA (Default), 1:Japan, 2:Hong Kong, 3:Sweden>
Example: nwdbg country 1
To Next Page
Loading...
