D-Link DGS-1008MP - Page 2

D G S -10 08MP
2
ENGLISH
# LED Status Description
2
PoE
Max.
Solid
Amber
Indicates the total PoE power
output of the switch has exceeded
the Guard Band threshold of 118
watts, but is still below the total
budget of 125 W.
Blinking
Amber
The total PoE budget of 125 W
has been exceeded. When the
switch’s PoE budget is being fully
utilized, no additional devices can
be powered through the switch.
O The total PoE power consumption
is below the 118 W Guard Band
threshold.
3 PoE
Solid
green
The port is providing power to the
connected PoE-powered device.
Blinking
Amber
Indicates a PoE-powered device
is connected to this PoE port,
but the switch has insufficient
remaining power budget to
power the device.
O There is no PoE-powered device
connected to this port.
4
Link/
ACT/
Speed
Solid
green
There is an active link negotiated
at 1000 Mbps on this port.
Blinking
green
There is trac on the port.
Solid
amber
There is an active link negotiated
at 10/100 Mbps on this port.
Blinking
amber
There is trac on the port.
O There is no active link on this port.
Table 1: LED overview
Front Panel Connectors
Figure 2: Front panel connectors
# Interface Description
1 Ports 1 - 8
10/100/1000 Mbps PoE-capable
ports, used for connecting Ethernet
devices and PoE-powered devices.
Table 2: Front connector description
Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up your DGS-1008MP
8-port Gigabit PoE Desktop Switch. The model
you have purchased may appear slightly dierent
from the one shown in the illustrations. For more
detailed information about the switch and technical
specications, please refer to the User Manual.
Package Contents
This DGS-1008MP package should include the
following items:
• 1 x DGS-1008MP
• 1 x Power cord
• 1 x Power cord retainer
• 1 x Rack mount kit and rubber feet
• 1 x Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
1
2
3
4
Figure 1: Front panel LEDs
# LED Status Description
1 Power
Solid
green
The switch is powered on.
O The switch is turned o.
1