Need help?Do you have a question about the D-Link DGS-1510-52X and is the answer not in the manual?
General| Number of Ports | 52 |
|---|---|
| Switching Capacity | 176 Gbps |
| MAC Address Table Size | 32K |
| RAM | 512 MB |
| Power over Ethernet (PoE) | No |
| Rack Mountable | Yes |
| Product Type | Switch |
| Ports | 48 x 10/100/1000Base-T + 4 x 10G SFP+ |
| Port Type | Gigabit Ethernet |
| Jumbo Frame | 9K |
| Management Type | Web, CLI, SNMP |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 10% to 90% (non-condensing) |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1d, 802.1w, 802.1s |
Provides essential safety guidelines to prevent injury and equipment damage.
Lists specific precautions to reduce risk of injury and equipment damage.
Details safety measures for installing the switch in a rack.
Overview of the DGS-1510 Series SmartPro Switch and its technologies.
Identifies components and indicators on the front panel of the switch.
Describes the types and number of ports on various DGS-1510 models.
Details the status and meaning of LED indicators on the switch.
Covers installing the switch without a rack and for rack mounting.
Overview of CLI, SNMP, and Web UI management methods.
Step-by-step guide to connect and configure the console port.
Covers the boot-up procedure and initial login process.
Details how to create secure user accounts for management access.
Overview of using the embedded Web User Interface for management.
Steps to log into the switch via the web browser interface.
Provides contact details for technical support across various regions.
To Next Page