Need help?Do you have a question about the D-Link DGS-1510- 52XMP and is the answer not in the manual?
General| Model | DGS-1510-52XMP |
|---|---|
| Category | Switch |
| PoE Standard | IEEE 802.3af/at |
| PoE Budget | 370W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| MAC Address Table Size | 16K |
| VLANs | 4K |
| Jumbo Frame Support | 9KB |
| Ports | 48 x 10/100/1000BASE-T, 4 x 10G SFP+ |
| Dimensions | 440 x 44 x mm |
| Operating Temperature | 0 to 45 °C |
| Storage Temperature | -40 to 70 °C |
| Standards Compliance | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at, 802.1D, 802.1w, 802.1s, 802.1Q, 802.1p |
| Humidity | 5% to 95% non-condensing |
Lists the types and quantities of copper, SFP, and SFP+ ports available on different switch models.
Provides essential recommendations for safely and properly setting up the switch.
Introduces different methods for managing the switch, including CLI, SNMP, and Web UI.
Details the steps and settings required to establish a console connection for CLI access.
Explains how to obtain and configure an IP address for the switch to enable network communication.
Step-by-step instructions on accessing the switch's web interface using a browser.
Provides data on transmission methods, packet buffer, wire speed, and forwarding rates.
To Next Page