Need help?Do you have a question about the D-Link DGS-3130-30S and is the answer not in the manual?
General| Product Type | Managed Switch |
|---|---|
| Number of Ports | 30 |
| MAC Address Table Size | 16K |
| Power over Ethernet (PoE) | No |
| Primary Function | Layer 3 |
| Layer | Layer 3 |
| Jumbo Frame | 9KB |
| Power Supply | AC |
| Management Type | Web, CLI, SNMP |
| Dimensions | 440 x 260 x 44 mm |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| VLANs | 4096 VLANs |
General rules for safe and proper switch installation.
Procedures for installing the switch without a rack or in a rack.
Details on connecting and installing optional RPS units.
Information on configuring and connecting switches in a stack.
Overview of available methods for switch configuration and monitoring.
Steps to connect and configure the switch via its console port.
Initial login process and creating user accounts.
How to set IP addresses for management.
Details on using SNMP for monitoring and managing the switch.
Steps to access the switch via a web browser.
Guide to understanding the status of each LED on the switch.
To Next Page