To Next PageTo Next Page
Need help?Do you have a question about the D-Link DGS-3630-28TC and is the answer not in the manual?
General| Switching Capacity | 128 Gbps |
|---|---|
| Device Type | Layer 3 Managed Switch |
| MAC Address Table Size | 16K entries |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions | 440 x 44 x 4.4 mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Jumbo Frame Support | 9K bytes |
Guides users on attaching rubber feet to the switch for surface placement.
Details the process of mounting the switch into a standard rack using brackets.
Explains how to insert SFP/SFP+ transceivers for network connections.
Instructions for connecting power, boot sequence indicators, and actions during power failure.
Steps to secure the AC power cord using a retainer to prevent accidental disconnection.
Identifies compatible RPS units like DPS-500A and DPS-500DC.
Describes mounting RPS units into a DPS-800 rack-mount chassis.
Explains accessing and using the switch via CLI through console or MGMT port.
Details the switch's support for SNMP versions for network management.
Describes accessing and using the graphical Web UI for switch configuration.
Setup and configuration for terminal emulation via the RJ-45 console port.
Steps for establishing a console connection using the mini-USB port.
Guidance on connecting to the switch for the first time after console setup.
How to establish a network connection to the switch's dedicated MGMT port.
Procedure to access the switch's Web UI using a browser and default credentials.
