Need help?Do you have a question about the D-Link DGS-3612G - xStack Switch and is the answer not in the manual?
General| Switch Type | Managed |
|---|---|
| Product Type | Layer 3 Switch |
| Ports | 12 x 10/100/1000Base-T |
| Uplink Ports | 4 x SFP |
| Layer | Layer 3 |
| Routing Protocols | RIP v1/v2, OSPF |
| Quality of Service (QoS) | Yes |
| Security Features | ACL, SSL, SSH |
| Management | Web-based GUI, CLI, SNMP |
| Dimensions (W x D x H) | 440 x 44 mm |
| Remote Management Protocol | SNMP |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p |
| Power Supply | 100-240 VAC |
Configures port attributes, speed, duplex, error states, media type, and auto-negotiation.
Details VLAN concepts, 802.1p priority, static VLANs, trunking, GVRP, and double VLANs.
Configures STP, RSTP, MSTP versions, bridge global settings, and port information.
Configures IPv4 and IPv6 interfaces, including static IP and loopback.
Configures RIP, OSPF, OSPFv3, and BGP routing protocols for network path determination.
Configures the switch as a DHCP/v6 server, including pools, bindings, and exclusion settings.
Configures default and user priority settings for 802.1p traffic prioritization.
Sets bandwidth limits for transmitting and receiving data rates on selected ports and queues.
Configures rules for packet forwarding, filtering, or mirroring based on profile criteria (Ethernet, IP, IPv6).
Locks MAC addresses on ports and restricts client access via IP-MAC binding.
Configures 802.1X and Web-based Access Control (WAC) for user authorization and authentication.
Configures MAC address lists for authentication and VLAN assignment, including local and RADIUS settings.
Provides options for resetting the switch to factory defaults or rebooting the system.
Saves configurations to memory and logs out of the Web-based management agent.
To Next Page