EasyManuals Logo

D-Link DGS-3612G - xStack Switch User Manual

D-Link DGS-3612G - xStack Switch
546 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Multicast Filtering Mode
To view this window, click L2 Features > Forwarding & Filtering > Multicast Filtering Mode, as shown below:
Figure 3- 64. Multicast Filtering Mode Settings window
The following parameters can be set:
Parameter Description
VLAN Name
The VLAN to which the specified filtering action applies. Tick the All check box to apply the action
to all VLANs on the Switch.
Filtering Mode
This drop-down menu allows you to select the action the Switch will take when it receives a
multicast packet that requires forwarding to a port in the specified VLAN.
Forward All Groups – This will instruct the Switch to forward a multicast packet to all
multicast groups residing within the range of ports specified above.
Forward Unregistered Groups – This will instruct the Switch to forward a multicast packet
whose destination is an unregistered multicast group residing within the range of ports
specified above.
Filter Unregistered Groups – This will instruct the Switch to filter any multicast packets
whose destination is an unregistered multicast group residing within the range of ports
specified above but it will forward the multicast reserved address. For example:
224.0.0.x/24 and FF0x::/16 can be forwarded in Filter Unregistered Groups mode
Click Apply to implement changes made.
146

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DGS-3612G - xStack Switch and is the answer not in the manual?

D-Link DGS-3612G - xStack Switch Specifications

General IconGeneral
BrandD-Link
ModelDGS-3612G - xStack Switch
CategorySwitch
LanguageEnglish

Related product manuals