xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Parameter Description
Port List
Enter the ports you wish to Find or Clear. Tick the All Ports check box to select all ports.
State
Select the state of the ports. Choose between Authenticated, Authenticating or Blocked.
Click Find to display the Host table entries or click Clear to remove an entry.
Trust Host
The Switch allows users to enter trusted host secure IP addresses and netmasks used for remote Switch management. It should be
noted that if one or more trusted hosts are enabled, the Switch will immediately accept remote instructions from only the specified
IP address or addresses. If you enable this feature, be sure to first enter the IP address of the station you are currently using.
To view this window, click Security > Trust Host, as shown below:
Figure 7- 41. Security IP window
376
To Next Page
Loading...
