20
Advanced > Virtual Server continued
Using the Configuration Menu (continued)
Example #1:
Protocol Type-
The protocol used for the virtual service.
Public Port-
The port number on the WAN (Wide Area Network) side that will
be used to access the virtual service.
Private Port-
The port number of the service used by the Private IP computer.
Schedule-
The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. If it is set to Time,
select the time frame for the service to be enabled. If the
system time is outside of the scheduled time, the service will
be disabled.
Virtual Server-
Select Enabled or Disabled.
Name-
Enter the name referencing the virtual service.
Private IP-
The server computer in the LAN (Local Area Network) that will be
providing the virtual services.
If you have a Web server that you wanted Internet users to
access at all times, you would need to enable it. Web
(HTTP) server is on LAN (Local Area Network) computer
192.168.0.25. HTTP uses port 80, TCP.
Name: Web Server
Private IP: 192.168.0.25
Protocol Type: TCP
Private Port: 80
Public Port: 80
Schedule: always
To Next Page
Loading...
Need help?
General
