f you are unable to browse, please do
the following:
1. Refer to Appendix B to check your
connection to the wireless router.
2. Use “Help” on the
Main Menu.
3. Refer to the “Troubleshooting”
section in the user’s manual.
Assigning a Static IP Address
If the network adapter is unable to obtain
an IP address automatically from the
Broadband Router, then go to:
START>SETTINGS>
CONTROL PANEL>
NETWORK.
Highlight “TCP/IP”
and Click on “Properties.”
Select the “IP Address” tab, and
Click on “Specify an IP Address.”
Type in the “IP Address” and the
“Subnet Mask.”
Click “OK”
Checking the connection
to the Internet
Appendix A
To Next Page
Loading...
Need help?
General
