D-Link DIR-1935 - Server Setup Instructions

84D-Link DIR-1935 User Manual
Section 4 - Conguration
Upgrade
This page will allow you to upgrade the router’s rmware, either automatically
or manually. To manually upgrade the rmware, you must rst download the
relevant le from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware Information
Current Firmware
Version/Date :
The current rmware's version and date will be displayed.
Check for New
Firmware:
Click this button to prompt the router to automatically check for a new
rmware version. If a newer version is found, it will prompt you to install it.
Upgrade Manually
Upgrade
Firmware:
If you wish to upgrade manually, rst download the rmware le you wish
to upgrade to. Next, click the Upgrade Firmware button and browse to
the le to install the new rmware. You can also browse to a language
pack le to install a new language pack.