DIR-651 Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
Conguring WAN Connection
1. Go to the Net / WAN page, select the WAN connection and click the
Delete button.
2. Click the Add button.
3. In the General settings section, select a needed value from the
Connection Type drop-down list.
4. From the Interface drop-down list, select the Internet value.
5. Specify a name for your connection (any name for easier identification) in
the Name field.
17
To Next Page
Loading...
