DIR-651 Quick Installation Guide
Configuring Local Area Network
1. Go to the Net / LAN page. If needed, change the IP address of the
router's LAN interface and the mask of the local subnet in the IP
Address and Netmask fields. If you need to change the IPv6 address of
the router's LAN interface, deselect the DHCP PD checkbox in the IPv6
address assignment section and specify the relevant value in the
IPv6 address field.
2. DHCP server. By default, the built-in DHCP server of the router assigns
IPv4 addresses to the devices of the LAN. If you want to manually assign
IPv4 addresses, disable the DHCP server (select the Disable value from
the Mode drop-down list).
3. IPv6 address assignment. By default, the devices of the LAN
automatically assign IPv6 addresses to themselves (the Stateless value
is selected from the Mode drop-down list in the IPv6 address
assignment section). If the devices of the LAN do not support IPv6
address autoconfiguration, enable the built-in DHCPv6 server of the
router (select the Stateful value). If you want to manually assign IPv6
addresses to devices of the LAN, select the Disable value.
4. After specifying the DHCP server settings, click the Apply button.
29
To Next Page
Loading...
