DIR-816L Quick Installation Guide
9. For connection of PPPoE type: in the PPP section, enter authorization
data provided by your ISP (the username (login) in the Username field
and the password in the Password and Password confirmation
fields), or select the Without authorization checkbox if authorization
is not required.
10. For connection of IPv6 PPPoE or PPPoE Dual Stack type: in the PPP
section, enter authorization data provided by your ISP (the username
(login) in the Username field and the password in the Password and
Password confirmation fields), or select the Without authorization
checkbox if authorization is not required. If you need to specify the
gateway address manually, in the IPv6 gateway section, deselect the
SLAAC checkbox and fill in the Static IPv6 gateway address field.
27
To Next Page
Loading...
