Need help?Do you have a question about the D-Link DIR-816L and is the answer not in the manual?
General| VPN support | Multi-sessions PPtP / l2tP / iPsec |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| USB version | 2.0 |
| Rack mounting | No |
| Bandwidth (first) | 2.4 GHz |
| Bandwidth (second) | 5 GHz |
| USB ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| DHCP client | - |
| Antennas quantity | 2 |
| Security algorithms | WPA, WPA2, WPS |
| Product color | Black |
Weight and Dimensions| Depth | 112 mm |
|---|---|
| Width | 151.6 mm |
| Height | 30.5 mm |
| Weight | 204 g |
Describes the router DIR-816L and its configuration for users and administrators.
Explains formatting and symbols used in the manual for clarity.
Outlines the purpose and content of each chapter in the manual.
Provides a general description of the DIR-816L dual band router and its capabilities.
Details the hardware and software specifications of the router.
Describes the physical layout and components of the router.
Details the LEDs and buttons on the front panel of the router.
Pre-installation checks and requirements for setting up the router.
Instructions for connecting the router to a PC via wired or wireless methods.
Steps to connect the router to a PC using an Ethernet cable.
Configuring Windows XP to obtain IP settings automatically from the router.
Configuring Windows 7 to obtain IP settings automatically from the router.
Instructions for connecting the router to a PC using a Wi-Fi adapter.
Steps to configure Wi-Fi adapter in Windows XP for router connection.
Steps to configure Wi-Fi adapter in Windows 7 for router connection.
Guide to accessing and logging into the router's web interface.
Overview of the router's web interface layout and navigation.
Details on the router's functions and navigation within the interface in Router Mode.
Details on the router's functions and navigation within the interface in AP Mode.
Explains system notifications and the drop-down menu functions.
Describes the different operating modes of the device.
Explanation of the router's function in Router Mode.
Explanation of the router's function in Access Point Mode.
Displays an interactive scheme illustrating router settings and LAN structure.
Wizard to guide through the initial Internet connection setup.
Guides through setting up various types of WAN connections.
Steps to create a PPPoE WAN connection.
Steps to create a Static IP WAN connection.
Steps to create a Dynamic IP WAN connection.
Steps to create a Static IPv6 WAN connection.
Steps to create a Dynamic IPv6 WAN connection.
Steps to create a PPPoE + Static IP WAN connection.
Steps to create a PPPoE + Dynamic IP WAN connection.
Steps to configure a 3G USB modem connection.
Steps to configure an LTE USB modem connection.
Verifies the status of the created WAN connection.
Enables and configures the Yandex.DNS web content filtering.
Guides through setting up the wireless network parameters.
Configures the router to use an IPTV set-top box.
Sets up all necessary parameters for the wireless network.
Configures the router to operate as an Access Point.
Configures the router to connect to an existing wireless network.
Enables and configures basic parameters for the wireless LAN.
Configures basic settings for the 2.4GHz wireless band.
Configures basic settings for the 5GHz wireless band.
Modifies security settings for the wireless LAN.
Configures MAC address-based filtering for wireless devices.
Enables and configures Wi-Fi Protected Setup for easy device pairing.
Defines advanced parameters for the wireless LAN.
Enables Wi-Fi Multimedia (WMM) for QoS features.
Configures the device as a client to connect to a wireless access point.
Displays data on the USB storage connected to the router.
Allows viewing and managing content of the USB storage.
Configures the router to act as a print server for shared printers.
Enables the Samba server for network access to USB storage.
Enables the FTP server for network access to USB storage.
Enables the DLNA server for media streaming from USB storage.
Changes the password for accessing router settings.
Manages device settings: reboot, backup, restore, and factory reset.
Configures system log options and remote log sending.
Upgrades router firmware and configures automatic update checks.
Provides essential safety precautions for router placement and usage.
Guidelines for optimizing wireless network range and performance.
Steps to connect the router to a cable or DSL modem for internet access.
To Next Page
