DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Figure 130. The page for configuring the client mode.
To configure the router as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter Description
Broadcast wireless
network 2.4GHz /
Broadcast wireless
network 5GHz
If the checkbox is not selected, devices cannot connect to the
relevant band of the router's WLAN. Upon that the router can
connect to another access point as a wireless client.
Wireless network settings
Page 162 of 304
To Next Page
Loading...
