DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Access Point Mode)
Net
In this menu you can configure basic parameters of the router's local area network.
LAN
To configure the router's local interface, proceed to the Net / LAN page.
Figure 195. Basic settings of the local interface.
If needed, edit the basic settings of the local interface.
Parameter Description
IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
Netmask
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
IPv6 address
The IPv6 address of the router in the local subnet. By default, the
following value is specified: fd01::1/64. The field is available
for editing, if the DHCP PD checkbox is not selected.
Gateway IP address
The gateway IP address which is used by the access point to connect
to the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
When needed settings are configured, click the Apply button.
Page 246 of 304
To Next Page
Loading...
