DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Miscellaneous
On the Advanced / Miscellaneous page, you can enable IGMP, RTSP, the SIP ALG, the PPPoE
pass through, PPTP pass through, and L2TP pass through functions for the router.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This
protocol allows using network resources for some applications, e.g., for streaming video, more
efficiently.
SIP is used for creating, modifying, and terminating communication sessions. This protocol allows
telephone calls via the Internet.
RTSP is used for real-time streaming multimedia data delivery. This protocol allows some
applications to receive streaming audio/video from the Internet.
The PPPoE pass through function allows PPPoE clients of computers from your LAN to connect to
the Internet through PPPoE connections of the router.
The PPTP pass through and L2TP pass through functions allow VPN PPTP and L2TP traffic to pass
through the router so that clients from your LAN can establish relevant connections with remote
networks.
Figure 142. The Advanced / Miscellaneous page.
The following elements are available on the page:
Parameter Description
IGMP
Select a version of IGMP from the drop-down list to enable IGMP.
Such a setting allows using the IGMP Proxy function for all WAN
connections for which the Enable IGMP Multicast checkbox is
selected.
To disable IGMP, select the Off value from the drop-down list.
Page 179 of 304
To Next Page
Loading...
