DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Advanced
In this menu you can configure advanced settings of the router:
• create groups of ports for VLANs
• enable the UPnP IGD protocol
• manually configure speed and duplex mode for each Ethernet port
• configure notifications on the reason of the Internet connection failure
• configure a DDNS service
• define static routes
• create rules for remote access to the web-based interface
• allow the router to use IGMP, RTSP, enable the SIP ALG, PPPoE pass through, PPTP pass
through, and L2TP pass through functions
• configure TR-069 client
• enable the flow control function
• configure VPN tunnels based on IPsec protocol.
Page 165 of 304
To Next Page
