DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Configuring Device (Router Mode)
Samba
On the USB storage / Samba page, you can enable the built-in Samba server of the router to
provide access to the USB storage for users of your LAN.
Figure 162. The USB storage / Samba page.
You can enable the Samba server only when a USB storage is connected to the router (in this case,
the Connected value is displayed in the USB storage field). To enable the Samba server, select
the Enable checkbox.
The Anonymous login checkbox enables anonymous access to the content of the USB storage
for users of your LAN. By default, the checkbox is selected.
If you want to provide authorized access to the content of the USB storage for users of your LAN,
deselect the checkbox. After applying the parameters on this page, proceed to the System / USB
Users page and create needed accounts.
In the Workgroup field, leave the value specified by default (WORKGROUP) or specify a new name
of a workgroup which participants will have access to the content of the USB storage.
In the Short description field, you can specify an additional description for the USB storage.
This value will be displayed in some operating systems. Use digits and/or Latin characters.
In the NetBIOS field, specify a new name of the USB storage for identification in your LAN. Use
digits and/or Latin characters.
After specifying the needed parameters, click the Apply button.
To disable the built-in Samba server of the router, deselect the Enable checkbox and click the
Apply button.
Page 205 of 304
To Next Page
Loading...
