D-Link DIR-819 - Inbound Filter

86D-Link DIR-819 User Manual
Section 3 - Conguration
Inbound Filter
INBOUND FILTERINBOUND FILTER
DIR-819
ADVANCED
Click Inbound Filter on the navigation menu to congure the Inbound Filter. The Inbound
Filter allows you to place ltering rules on a per IP basis. Using this tool you may restrict
access to or block trac to a specic remote IP address or range. When you are satised
with your conguration, click Save Settings.
ORANGE
OrangeText
Save Settings Don’t Save Settings
INBOUND FILTER RULES LIST
Name Action Remote IP Range
ADD INBOUND FILTER RULE
Name :
Action : Allow
▼
Remote IP Range : Enable Remote IP Start Remote IP End
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
Add Cancel
The currently dened Inbound Filter rules are listed here.
Click the Save Settings button when you are nished.
INBOUND FILTER RULES LIST
Name: Enter a name for this Inbound Filter.
Action: Allow or Deny trac.
Remote IP Range
Enable: Check the box to enable this rule.
Remote IP Start: Enter the starting IP address to apply the rule to.
Remote IP End: Enter the ending IP address to apply the rule to.
ADD INBOUND FILTER RULE