D-Link DIR-819 - Page 93

89D-Link DIR-819 User Manual
Section 3 - Conguration
Machine Address: If you select MAC as the address type, enter the IP address of the
device you wish to apply the policy to or use the Computer Name
dropdown menu to quickly select a computer. The MAC address is
automatically populated. You may also use the Clone Your PC’s MAC
Address button to use the MAC address of the device you are running
the wizard from.
Add: Click this button to add the machine to the table.
Cancel: Click this button to clear the currently congured information
Machine
IP or MAC Address: To edit a machine added to the table, click its corresponding pencil
icon. To remove a machine click its corresponding trashcan icon.
Click Next to continue.
STEP 3: SELECT MACHINE
Select the machine to which this policy applies.
Specify a machine with its IP or MAC address.
Address Type :
 IP  MAC
IP Address :
<<
Computer Name
▼
Machine Addres :
<<
Computer Name
▼
Clone Your PC’s MAC Address
Add Cancel
Machine
Prev Next Save Cancel
Add Policy (continued)
STEP 4: SELECT FILTERING METHOD
Select the method for ltering.
Method :
 Log Web Access Only  Block All Access  Block Some Access
Prev Next Save Cancel
STEP 4: SELECT FILTERING METHOD
Select the method for ltering.
Method :
 Log Web Access Only  Block All Access  Block Some Access
Apply Web Filter :
☑
Apply Advanced Port Filters :
☑
Prev Next Save Cancel
Method: Select the method for ltering. The available options are Log Web
Access Only, Block All Access, or Block Some Access.
If you select Log Web Access Only or Block Some Access, click Save to nish the wizard.
If you select Block Some Access, select the following options:
Apply Web Filter: Check this box to enable Web Access Logging.
Apply Advanced
Port Filters:
Check this box to enable port ltering.
Click Next to continue.
STEP 4: SELECT FILTERING METHOD