DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Figure 124. The page for adding a MAC address.
You can specify the following parameters:
Parameter Description
MAC address
In the field, enter the MAC address to which the selected filtering
mode will be applied.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
Hostname
The name of the device for easier identification. You can specify any
name.
Enable
Select the checkbox to enable the selected filtering mode of the
device.
When you have configured the parameters, click the Apply button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the left
of the relevant MAC address and click the Delete button.
Page 154 of 257
To Next Page
Loading...
