DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
3G/LTE Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, proceed to
the 3G/LTE modem / PIN section. On the opened page, enter the PIN code in the PIN code field
and click the Enter button
12
.
Figure 163. The page for checking the PIN code.
Some USB modems
13
have an IP address from the subnet which coincides with the router's local
subnet. In this case, the relevant notification will be displayed in the web-based interface. For
proper operation of a USB modem, proceed to the Net / LAN page and change the value of the IP
Address field (for example, specify the 192.168.2.1 value). Wait until the router is rebooted.
12 For GSM USB modems and some models of LTE USB modems. For other USB modems, it is required to disable
the PIN code check on the identification card prior to connecting the USB modem to the router.
13 For Huawei E3272, ZTE MF823, ZTE MF827 USB modems only.
Page 214 of 257
To Next Page
Loading...
