DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with
3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Settings
On the 3G/LTE modem / Settings page, you can enable/disable the function for automatic
creation of 3G/LTE WAN connection upon plugging a USB modem into the router
14
.
Figure 164. The 3G/LTE modem / Settings page.
If the Create LTE/3G connection automatically checkbox is enabled and the PIN code check
for the SIM card inserted into your USB modem is disabled, then an active WAN connection with
default settings (for LTE modems) or the operator's settings (for GSM modems) will be
automatically created when plugging a USB modem into the router. The connection will be
displayed on the Net / WAN page.
If you don't want to use this function, deselect the Create LTE/3G connection automatically
checkbox and click the Apply button.
14 For LTE and GSM USB modems only.
Page 215 of 257
To Next Page
Loading...
