DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Creating 3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct
operation of the mobile WAN connection click the ENTER PIN button in the notification in the top
right corner of the page and enter the PIN code
10
on the page displayed. Then on the connection
creation page, in the General Settings section, select the relevant value from the Connection
type drop-down list and specify the needed values.
Figure 82. The page for creating a new 3G connection. The General Settings section.
Parameter Description
General Settings
Interface
A physical or virtual WAN interface to which the new connection
will be assigned.
Connection name A name for the connection for easier identification.
10 Some models of USB modems do not support disabling the PIN code check on the SIM card through the web-based
interface of the router.
Page 105 of 249
To Next Page
Loading...
