DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
• create or edit VLANs
• add name servers
• configure a DDNS service
• configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the router
• setup the rate limit for traffic transmitted from every port of the router
• limit traffic between LAN ports
• configure notifications on the reason of the Internet connection failure
• define static routes
• configure TR-069 client
• create rules for remote access to the web-based interface
• enable the UPnP IGD protocol
• enable the built-in UDPXY application for the router
• allow the router to use IGMP and MLD
• allow the router to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the router
• configure VPN tunnels based on IPsec protocol.
Page 175 of 249
To Next Page
Loading...
