DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
IPv6
Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses
assignment settings, or specify MAC address and IPv6 address pairs.
Figure 93. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
Parameter Description
Local IPv6 Address
Mode of local IPv6
address assignment
Select the needed value from the drop-down list.
• Static: An IPv6 address and a prefix are specified manually.
• Prefix delegation: The router requests a prefix to
configure an IPv6 address from a delegating router.
IPv6 address
The IPv6 address of the router in the local subnet. By default, the
following value is specified: fd01::1. The field is available for
editing if the Static value is selected from the Mode of local IPv6
address assignment drop-down list.
Prefix
The length of the prefix subnet. By default, the value 64 is
specified. The field is available for editing if the Static value is
selected from the Mode of local IPv6 address assignment
drop-down list.
Page 118 of 249
To Next Page
Loading...
