DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 94. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter Description
Dynamic IPv6 Addresses
Mode of dynamic IPv6
address assignment
Select the needed value from the drop-down list.
• Disable: Clients' IPv6 addresses are assigned manually.
• Stateful: The built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IPv6 and
End IPv6 fields. Also when this value is selected, the
Static IP Addresses section is displayed on the tab.
• Stateless: Clients themselves configure IPv6 addresses
using the prefix.
Start IPv6
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
End IPv6
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
Lease time
The lifetime of IPv6 addresses provided to clients. The field is
available for editing if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
Page 119 of 249
To Next Page
Loading...
