DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the router itself choose the
channel with the least interference.
Enable additional
channels
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels (the
12th and 13th – in the 2.4 GHz band, the 100th and higher – in the 5
GHz band), move the switch to the right.
Channel
The wireless channel number.
To select a channel manually, left-click; in the opened window,
select a channel and click the SAVE button. The action is available,
when the Select channel automatically switch is moved to the
left.
To make the router select the currently least loaded channel, click
the Refresh icon ( ). The icon is displayed, when the Select
channel automatically switch is moved to the right.
Enable periodic
scanning
Move the switch to the right to let the router search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Scanning period
Specify a period of time (in seconds) after which the router rescans
channels.
When you have configured the parameters, click the APPLY button.
To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed
parameters and click the APPLY button.
Also you can create an additional wireless network. To do this, click the ADD WI-FI NETWORK
button. On the opened page, specify the relevant parameters.
Page 124 of 249
To Next Page
Loading...
