10D-Link DIR-859 User Manual
Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power
LED does not light up, press the Power button on the back of the router.
6. After the router has powered up, verify that the Power and Internet LEDs are both lit. Proceed with router conguration.
* If you are connecting wirelessly, you may now connect to the router using the supplied Wi-Fi Conguration Card for the Wi-Fi network name (SSID) and Wi-Fi password.
4 3 2 4 INTERNET 12V --1.5A POWER WPS
Modem
DIR-859
Computer
To Next Page
Loading...
