D-Link DIR-859 - IPv6

34D-Link DIR-859 User Manual
Section 3 - Conguration
IPv6
To congure an IPv6 connection, click the IPv6 link.
To return to the IPv4 settings, click IPv4.
Choose your IPv6 Internet Connection type from the drop-down
menu. For most of the connection types, after you make a selection
you will see additional elds below that require input. The exception
is for Local Connectivity Only. For this connection type you must
click on Advanced Settings... to see the additional elds below.
My Internet
Connection Is:
Click Advanced Settings... to expand the list and see all elds for the selected option.
For Auto Detection refer to page 35.
For Static IPv6 refer to page 36.
For Auto Conguration (SLAAC/DHCPv6) refer to page 38.
For PPPoE refer to page 39.
For IPv6 in IPv4 Tunnel refer to page 41.
For 6 to 4 refer to page 43.
For 6rd refer to page 44.
For Local Connectivity Only refer to page 46.