D-Link DIR-882-US - Admin

70D-Link DIR-882 User Manual
Section 3 - Conguration
Admin
This page allows you to change the administrator settings, such as change the Admin password and enable remote management.
From the Management menu, click System Admin.
Enter a new Password for the administrator account. You will need to
enter this password whenever you congure the router using a web
browser.
Enables a challenge-response test designed to prevent online hackers
and unauthorized users from gaining access to your router’s network
settings.
Check to enable HTTPS to connect to the router securely. This means
to connect to the router, you must enter https://192.168.0.1 instead
of http://192.168.0.1.
Remote management allows the DIR-882 to be congured from the
Internet by a web browser. A password is still required to access the
web management interface.
The port number used to access the DIR-882 is used in the URL. Example:
http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-
882 and 8080 is the port used for the web management interface. If
you enable HTTPS Server, you must enter https:// as part of the URL
to access the router remotely.
Click Save when you are done.
Password:
Enable
Graphical
Authentication
(CAPTCHA):
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
To load, save, or reset the settings, or to reboot the router, click System and refer to page 71.