48
Port Forwarding/Virtual Server Setting
Q22: How do I enable DMZ on my router?
DMZ should only be used if you have a computer/device that cannot run Internet applications properly
from behind the router.
Note: By enabling the DMZ (Demilitarized Zone) feature, you are allowing the router to forward all incoming
traffic from the internet to the device specified, virtually disabling the routers "firewall protection". This may
expose the device to a variety of security risks, so only use this option as a last resort.
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address
bar. Then login and follow the steps below:
Step 1: Click Features -> Firewall
To Next Page
Loading...
