50
Q23: How do I open ports for routers?
Scenario 1: Single Port:
By default, your router will block all incoming connections (into your network) and allow all Outgoing
connections to the Internet. In some cases, you may need to allow some connections into your
network (for Example: Using the Remote Desktop Application). To do this, you must open ports on
your router.
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address
bar. Then login and follow the steps below:
Step 1: Click Feature -> Port Forwarding
To Next Page
Loading...
