D-Link DIS-700G-28SW - User Manual

DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots Quick Installation Guide
1
DIS-700G-28SW
Industrial Layer 2+ Gigabit Managed
Switch with SFP slots
Quick Installation Guide
This document outlines the quick installation of the DIS-700G-28SW series.
Package Checklist
Please verify that the box contains the following items:
Item
Quantity
Rack-mounted Ethernet switch
1
Rack-mount bracket
2
Screws (for bracket)
6
ALM Terminal Block (2-pin)
1
Quick Installation Guide
1
RJ45 Ethernet Port Dust Cover
14
SFP Ethernet Port Dust Cover
2
Safety Instructions
When a connector is removed during installation, testing, or servicing, or when an energized fiber is
broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs,
depending on the laser output power.
The primary hazards of exposure to laser radiation from an optical-fiber communication system are:
 Damage to the eye by accidental exposure to a beam emitted by a laser source.
 Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.

D-Link DIS-700G-28SW Specifications