D-Link DKVM-2K - User Manual

1
2-Port KVM Switch
with USB 2.0 Sharing
with Built-in Cables
DKVM-2KU
This product works with all
Windows Operating Systems
Check Your Package Contents
These are the items included with your purchase:
Before You Begin
You must have at least the following:
• PS/2 Keyboard
• PS/2 Mouse
• VGA or Higher Monitor
In case you would like to share USB device(s) via DKVM-2KU, a USB
Hub or USB device (USB1.1 or USB 2.0 compliant) is required.
• DKVM-2KU KVM Switch with USB 2.0
Sharing with Built-In Cables
• Quick Installation Guide
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice.
If any of the above items are missing, please contact your reseller.

Summary

Installing the DKVM-2 KU

Connect Console Peripherals

Connect monitor, PS/2 keyboard, and PS/2 mouse to the DKVM-2KU console ports.

Connect Computer Ports

Attach DKVM-2KU built-in cables to computer's VGA, PS/2, and USB ports.

Switching with the DKVM-2 KU

Using the Select Button

Use the physical button on the DKVM-2KU to switch between computers.

Hot Key Switching

Utilize keyboard shortcuts (Scroll Lock combinations) for computer switching and modes.

Troubleshooting Tips

Keyboard Troubleshooting

Addresses issues with keyboard functionality, detection, or errors during boot-up.

Mouse Troubleshooting

Covers problems with mouse functionality, detection, or random movement.

Video Troubleshooting

Guides on resolving unclear video images, resolution, and refresh rate issues.

USB Device Troubleshooting

Helps resolve issues with USB device functionality or detection.

Technical Support

D-Link DKVM-2K Specifications

General

Brand	D-Link
Model	DKVM-2K
Category	Switch
Language	English